The Eazy Pod Complete comes with an Airtech 70 Air Pump kit and built in 18 watt Uv, manifold, 10m airline & 2 air stones and a built in 18 watt UV
Pump fed applications only
The Eazy Pod consists of a first stage settlement chamber where in which the heavier solids can settle out, before moving through static Kaldnes media retained in a stainless steel perforated screen where the fine particles are trapped.
The central chamber holds 30 litres of static K1 media. As the water enters the central chamber, the fine smaller solids become entrapped in the K1.
After passing through the K1 media, the clean water then rises and overflows into the inner return pipe of the Eazy Pod and back to the pond.
The inlet on the new Eazy Pod features a welded 1.5 inch Slide Valve with 1.5 inch hose tail, making pump fed installation even easier, for gravity fed installations simply remove this and use the 4 inch x 3 inch flexible rubber boot supplied to contact to the bottom drain.The waste on the Eazy Pod has also been made simpler with the introduction of a 1.5 inch Slide Valve.
The Airtech 70 Air Pump feeds vital oxygen in to the pond and when you need to clean the Eazy Pod Air Uv simply turn the valve and redirect the Air to the Eazy Pod,
This will agitate the static K1 and therefore cleaning can be done quickly and easily without getting your hands wet, when you have done simply turn the air valve on the Eazy pod and send the Air back to the pond, it really is that Easy!
Max Pond Size: 20,000 Litres
Max Koi Pond Size 10,000 Litres
Maximum garden pond flow rate: 10,000 lph
Maximum Koi Pond flow rate: 5,000 lph
Kaldnes K1 media: 25 litres included
Recommended Air Pump: Airtech 40 litres